返回頂部
NO:1
PET片材母粒
PET板材 高透光，長久耐候，無裂紋，無味，環保，阻燃，不易碎，不褪色，抵抗沖擊強。可回收再利用; 優良的熱塑特性; 良好的電絕緣特性。
PET sheet has high light transmission, long-term weatherability, no crack, tasteless.environmental protection, flame retardant，non-breakable, non-fading, strong impactresistance Can be recvcled: Excellent thermoplastic properties: Good electrica insulatiorcharacteristics.
參考配比:1:50-1:10(用戶可根據要求自行調整)包 裝: 25kg/袋，(可按客戶需求予以訂做)。儲 存:存放于陰涼干燥處，忌爆曬，雨淋。Reference ratio: 1:50-1:10 (users can adjust themselves according to requirementsPacking: 25kg/bag (can be customized according to customer requirements).Storage: Store in a cool and dry place, avoid explosion and rain.
NO:2
雙向拉伸膜BOPET母粒
PET專用色母粒的載體、染料、助劑等都經過嚴格篩選，無毒，無味，綠色環保，著色性強，性能穩定，無色點和色紋，具有良好的耐熱及耐光穩定性
The carrier, dye and auxiliaries of PET special color masterbatch have been strictlscreened, which are non-toxic, tasteless, green, strong coloring property, stable performance.colorless spots and color lines, and have good heat resistance and light resistance.
1、車窗膜透光率可達90%以上，抗紫外線可達99%，紅外線可達80%以上1. The light transmittance of the window film can reach over 90%, the ultraviolet resistancecan reach 99%,and the infrared resistance can reach over 80%
2、光學膜表面光滑，膜層之間的界面呈幾何分割;膜層的折射率在界面上可以發生躍變，但在膜層內是連續的;可以是透明介質，也可以是吸收介質;可以是法向均勻
的，也可以是法向不均勻的
2. The surface of the optical film is smooth, and the interface between the films isgeometrically divided: The refractive index of the film can iump at the interface, but it iscontinuous in the film. lt can be a transparent medium or an absorbing medium; lt can benormaluniformornormalnon-uniform
3、包裝膜3. Packaging film
類別 | 試驗結論 |
| Item | TestingConclusion |
| 相溶性 Phase solubility | PET |
| 載體 Carrier | PET |
| 水含量 water content (%) | <0.2% |
| 耐遷移性 Migration resistance (Level) | 4-5 |
| 耐曬性 Light fastness (Level) | 6-7 |
| 耐溫性 Temperature resistance(C) | 220 |
| 溶化溫度 Melting temperature() | 120 |
| 熔融指數 MFI(g/10min)[2.16kg/190°C] | >20 |
| 添加量 Addition amount(%) | 6%-8% |
參考配比:1:50-1:10(用戶可根據要求自行調整)
包 裝:25kg/袋，(可按客戶需求予以訂做)。
儲 存:存放于陰涼干燥處，忌爆曬，雨淋。
Reference ratio: 1:50-1:10 (users can adjust themselves according to requirements)
Packing: 25kg/bag (can be customized according to customer requirements).
Storage: Store in a cool and dry place, avoid explosion and rain.
NO:3
PET吹瓶母粒
PET色母料具有無毒、耐氣候性好、抗化學藥品穩定性好、電絕緣性能好、耐磨擦性好的特點，PET色母料可用于注塑、擠出、吹塑、涂覆、粘接、機加工、電鍍、真空鍍金屬、印刷等工藝中。
PET color masterbatch has the characteristics of non-toxicity, good weather resistance.good chemical stability, good electricalinsulation performance and good wear resistance. PETcolor masterbatch can be used in injection molding, extrusion, blow molding, coating.oonding, machining, electroplating, vacuum metalplating, printing and other processes.
參考配比:1:50-1:10(用戶可根據要求自行調整
包 裝: 25kg/袋，(可按客戶需求予以訂做)。
儲 存:存放于陰涼干燥處，忌爆曬，雨淋。
Reference ratio: 1:50-1:10 (users can adjust themselves according to requirements
Packing: 25kg/bag (can be customized according to customer requirements).
Storage: Store in a cool and dry place, avoid explosion and rain.
NO:4
PET 拉絲母粒
PET拉絲抗皺、保型、挺闊、美觀，對熱、光穩定性好，經洗耐穿，可與其他纖維混紡，年久不變黃。
PET drawing anti-wrinkle, shape-preserving, very wide, beautiful, heat, light stability.
washable and durable, can be blended with other fibers, does not turn yellow over time.
參考配比:1:50-1:10(用戶可根據要求自行調整)
包 裝:25kg/袋，(可按客戶需求予以訂做)。
儲 存:存放于陰涼干燥處，忌爆曬，雨淋。
Reference ratio: 1:50-1:10 (users can adjust themselves according to requirements
Packing: 25kg/bag (can be customized according to customer requirements).
Storage: Store in a cool and dry place, avoid explosion and rain.
NO:5
注塑色母
本系列注塑專用色母粒具有色澤明亮，著色強度高、分散性好，濃度高，白度好，遮蓋力強，價格合理等優點，耐遷移性和耐熱性好等特點。此產品通過歐盟SGS公司環保檢測認證合格。
This series of special masterbatch for injection molding has the advantages of bright colorhigh color strength, good dispersion, high concentration, good whiteness, strong hiding powerreasonable price, good migration resistance and heat resistance. This product has passed the EUSGS environmental protection testing certification.
技術指標Technical index
| 指標Index | 數值numericalvalue |
| 載體 Carrier | PP、PE |
| 色粉含量 Toner content | 35%-70% |
| 熔融指數 MFI(21.6KG/190°C) | 10-30g/min |
| 相溶性Intermiscibiliy | PP、PE |
添加比例Addition Percentage
根據客戶對產品外觀的需求，自行調整添加量，推薦添加2%~4%
Adjust the addition percentage according to customer requirements for products appearanceeffect.The recommend addition percentage is 2%~4%
包裝&儲存Package and Storage
塑料編織袋包裝，每袋凈重25Kg,請存放在干燥處
PP woven bagN.W 25Kq/bag.Please store in dry place
NO:6
管材專用色母
本系列用于PE給水管、排水管及燃?xì)夤艿膽?yīng)用。環保、無毒、無味，產品表面光滑亮澤和實色顏色穩定，韌性好，分散性好不會出現色點和色紋等現象，既降低成本，節約添加劑，又減少?gòu)S房場地污染。此產品通過歐盟SGS公司環保檢測認證合格。
This series is used for PE water supply pipe, drain pipe and gas pipe application. lt isenvironmentally friendly, non-toxic, and tasteless. The product surface is smooth and shiny and thecolor is stable. lt has good toughness and good dispersion without color spots and color streaks. ltreduces costs, saves additives and reduces plant site pollution. This product has passed the EU SGSenvironmental protection testing certification.
技術指標Technical index
| 項目Project | 指標Index |
| 外觀Surface | 表面光潔，大小均勻，色澤一致 |
| 載體 Carrier | PE、PP、EVA |
| 色粉含量Toner content | 10%-55% |
| 熔融指數MFI(21.6KG/190°C) | 1-40g/10min |
添加比例Addition Percentage
根據客戶對產品外觀的需求，自行調整添加量，推薦添加1%~2%
Adjust the addition percentage according to customer requirements for products appearanceeffect.The recommend addition percentage is 1%~2%
包裝&儲存Package and Storage
塑料編織袋包裝，每袋凈重25Kq,請存放在干燥處
PP woven bagN.W 25Kq/bag.Please store in dry place
NO:7
家電注塑色母
本系列為洗衣機、空調外殼等注塑件專用色母粒，有著極佳熔融混煉分散性和顏色穩定性，減少塑料受熱降解，并且有著最高的機械強度保持率。
This series is a special masterbatch for injection molding parts such as washing machine andair conditioner shell. lt has excellent melt mixing dispersion and color stability, reduces thermadearadation of plastics, and has the highest mechanica strenath retention rate. This product haspassed the EU SGS environmental protection testing certification.
技術指標Technicalindex
| 指標Index | 數值numericalvalue |
| 載體 Carrier | PP、ABS、HIPS |
| 色粉含量 Toner content | 30%-70% |
| 熔融指數 MFI(21.6KG/190°C) | 10-30g/min |
| 相溶性Intermiscibiliy | PP、ABS、HIPS |
添加比例Addition Percentage
根據客戶對產品外觀的需求，自行調整添加量，推薦添加2%~4%
Adjust the addition percentage according to customer requirements for products appearanceeffect.The recommend addition percentage is 2%~4%
包裝&儲存Package and Storage
塑料編織袋包裝，每袋凈重25Kq,請存放在干燥處PP woven bag,NW 25Kg/bag.Please store in dry place
NO:8
吹膜、拉絲色母
本系列吹膜、拉絲專用色母粒，選用優質顏料，保持良好的化學穩定性，分散性好、遮蓋力強，減少受熱降解，此產品通過歐盟SGS公司環保檢測認證合格。
This series of color masterbatches for blown fim and wire drawing use high-quality pigmentsto maintain good chemical stability, good dispersibility, strong hiding power, and reduce thermaldearadation, This product has passed the EU SGS environmental protection inspection certification.
技術指標Technicalindex
| 指標Index | 數值numericalvalue |
| 載體 Carrier | PP、PE、EVA |
| 色粉含量 Toner content | 20%-70% |
| 熔融指數 MFI(21.6KG/190°C) | 10-30g/min |
| 相溶性Intermiscibiliy | PP、PE |
添加比例Addition Percentage
根據客戶對產品外觀的需求，自行調整添加量，推薦添加2%~6%
Adjust the addition percentage according to customer requirements for products appearanceeffect.The recommend addition percentage is 2%~6%
包裝&儲存Package and Storage
塑料編織袋包裝，每袋凈重25Kq,請存放在干燥處
PP woven bagNW 25Kq/bag.Please store in dry place
NO:9
線纜色母
本系列用于通訊纜、數據纜(網絡線)、電子線、汽車線，以及光纖光纜、電力電纜等領域。適用于PVC、EVA、低煙無鹵等材料，中高濃度，低添加比，此產品通過歐盟SGS公司環保檢測認證合格。PEThis series is used in communication cables, data cables (network cables), electronic cablesautomotive cables, optical fiber cables, power cables and other fields. Suitable for PE, PVC,EVAow-smoke and halogen-free materials. With high concentration and low addition ratio, thisproduct has passed the EU SGS environmental protection testing certification.
技術指標Technical index
| 指標Index | 數值numericalvalue |
| 載體 Carrier | PP、PE、EVA |
| 色粉含量 Toner content | 20%-55% |
| 熔融指數 MFI(21.6KG/190°C) | 10-30g/min |
| 相溶性Intermiscibiliy | PP、PE、EVA |
添加比例Addition Percentage
根據客戶對產品外觀的需求，自行調整添加量，推薦添加1%~2%
Adjust the addition percentage according to customer requirements for products appearanceeffect.The recommend addition percentage is 1%~2%
包裝&儲存Package and Storage
塑料編織袋包裝，每袋凈重25Kg,請存放在干燥處PP woven bag,N.W 25Kg/bag.Please store in dry place
NO:10
管材、管件專用色母
本系列母粒為PP-R、MPP管材、管件專用色母粒，本產品采用進口的杜邦白粉，PP-R專用樹脂做載產品達到飲用水的級別要求。選用優質顏料，保持良好的化學穩定性，分散性好、遮蓋力強，減少受熱降體解，環保符合SGS等法規。
This series of masterbatches are special masterbatches for PP-R, MPP pipes and fittings. Thisproduct uses imported DuPont titanium dioxide and PP-R special resin as the carrier. The productreaches the level of drinking water. lt requires high-quality pigments to maintain good chemistrystability, good dispersion and covering force, it reduces the thermal degradation, and theenvironmental protection standard is in line with SGS and other regulations.
技術指標Technical index
| 指標Index | 數值numericalvalue |
| 載體 Carrier | PP-R、PE |
| 色粉含量 Toner content | 40%-70% |
| 熔融指數 MFI(21.6KG/190°C) | 10-30g/min |
| 相溶性Intermiscibiliy | PP、PP-R |
添加比例Addition Percentage
根據客戶對產品外觀的需求，自行調整添加量，推薦添加2%~4%
Adjust the addition percentage according to customer requirements for products appearanceeffectThe recommend addition percentage is 2%~4%
包裝&儲存Package and Storage
塑料編織袋包裝，每袋凈重25Kq,請存放在干燥處PP woven bag,N.W 25Kg/bag.Please store in dry place
NO:11
透明色母
本系列選用ABS、亞克力等為載體樹脂，適用于車尾燈專用色母粒，選用優質顏料，保持良好的化學穩定分散性好、減少受熱降解，此產品通過歐盟SGS公司環保檢測認證合格。
This series uses ABS, acrylic, etc. as the carrier resin, suitable for the special color masterbatchfor car tail lights. lt uses high-quality pigments which has good chemical stability and dispersityand it reduces the thermal degradation, This product has passed the EU SGS companvenvironmentalprotection inspection certification.
技術指標Technical index
| 指標Index | 數值numericalvalue | |
| 載體 Carrier | PP、ABS、亞克力 | |
| 分散性 Dispersity | 無色點、條紋 | |
| 耐熱性 Heat resistance | 270-350°C | |
| 耐遷移Resistance to migration | 5級 | |
| 耐曬性 Light fastness | 8級 | |
添加比例Addition Percentage
根據客戶對產品外觀的需求，自行調整添加量，推薦添加1%~2%
Adjust the addition percentage according to customer requirements for products appearanceeffect.The recommend addition percentage is 1%~2%
包裝&儲存Package and Storage
塑料編織袋包裝，每袋凈重25Kq,請存放在干燥處PP woven bag,N.W 25Kg/bag.Please store in dry place
NO:12
板材、片材色母
本產品適用于以ABS、PE、PP、PC、PS、亞克力等載體原料的板材著色工藝，具有遮蓋力特強，分散性好使用簡單等特點，是工程塑料板材理想的專用著色母料，此產品通過歐盟SGS公司環保檢測認證合格。This product is suitable for the coloring process of ABS, PE, PP PC, PS, acrylic and other carriermaterials. lt has the characteristics of strong covering power, good dispersion and simple to use. ltis an ideal special coloring masterbatch for engineering plastics. This product has passed the EUSGS environmental protection testing certification.
技術指標Technical index
| 指標Index | 數值numericalvalue |
| 載體 Carrier | PP、PE、ABS |
| 色粉含量 Toner content | 20%-70% |
| 熔融指數 MFI(21.6KG/190°C) | 10-30g/min |
| 相溶性Intermiscibiliy | PP、PE、ABS |
添加比例Addition Percentage
根據客戶對產品外觀的需求，自行調整添加量，推薦添加2%~4%
Adjust the addition percentage according to customer requirements for products appearanceeffect.The recommend addition percentage is 2%~4%
包裝&儲存Package and Storage
塑料編織袋包裝，每袋凈重25Kq,請存放在干燥處PP woven bag,N.W 25Kg/bag.Please store in dry place
NO:13
光擴散母粒
針對不同的樹脂，選用不同有機光擴散劑為主要成分，具有高霧度和高透光率，本產品具有良好的相容性、分散性。適用于LED燈罩、光導板、廣告燈箱板材、儀表罩等。
For different resins, different organic light diffuser is selected as the main component.which has high haze and high light transmittance. This product has good compatibility anodispersion. Applicable to LED lampshade, light guide plate, advertising light box plate.instrument cover, etc.
技術指標: Technicalindicators:
項目Item | 指標Indicators |
揮發份 Volatile matter | ≤0.4 |
秀光率Transmittance | ≥90% |
霧度 Haze | ≥80% |
拉伸比強度 Tensile specific strength | ≥95% |
沖擊比強度Impact specific strength | ≥95% |
參考配比:1:100-1:20(用戶可根據要求自行調整)
包 裝:25kg/袋，(可按客戶需求予以訂做)。
儲 存:存放于陰涼干燥處，忌爆曬，雨淋。
Reference ratio: 1:100-1:20 (users can adjust themselves according to requirements
Packing: 25kg/bag (can be customized according to customer requirements).
Storage: Store in a cool and dry place, avoid explosion and rain.
NO:14
阻燃色母粒
該產品阻止和延緩塑料制品的燃燒，具有可靠的阻燃性，性能穩定，使用方便。
The product prevents and delays the burning of plastic products, and has reliable flameretardancy,stable performance and convenient use.
技術指標: Technicalindicators:
產品型號 Product Type | 適用范圍Use Area
| 使用比例Reference Ratio | 垂直燃燒Vertical TesT |
PET、PP
| PET、PP
| 3%~12%
| V-2
|
PE-F
| PE
| 10%~12%
| V-2
|
HIPS-F
| HIPS
| 20%~25%
| V-2
|
ABS-F
| ABS
| 20%~25%
| V-2
|
參考配比:1:50-1:10(用戶可根據要求自行調整)
包 裝:25kg/袋，(可按客戶需求予以訂做)。
儲 存:存放于陰涼干燥處，忌爆曬，雨淋。
Reference ratio: 1:100-1:20 (users can adjust themselves according to requirements
Packing: 25kg/bag (can be customized according to customer requirements).
Storage: Store in a cool and dry place, avoid explosion and rain.
NO:15
抗靜電色母粒
該產品降低塑料表面電阻，防止靜電吸塵，薄膜間靜電吸附等。能廣泛應用于聚烯烴抗靜電塑料產品中
This product reduces the surface resistance of plastics and prevents electrostatic dustcollection and electrostatic adsorption between films. lt can be widely used in polyolefinantistatic plastic products.
技術指標: Technicalindicators:
材料 | 添加比例%
| 電阻表面Q | 測試標準 |
PET
| 2%-3%
| <10 10
|
GB/T1410 |
PP
| 3%-4%
| <10 10
| |
ABS
| 5%-8%
| <10 10 | |
HIPS、PS
| 5%-8%
| <10 10 |
參考配比:1:25(用戶可根據要求自行調整)
包 裝:25kg/袋，(可按客戶需求予以訂做)。
儲 存:存放于陰涼干燥處，忌爆曬，雨淋。
Reference ratio: 1:100-1:20 (users can adjust themselves according to requirements
Packing: 25kg/bag (can be customized according to customer requirements).
Storage: Store in a cool and dry place, avoid explosion and rain.
抗老化母粒:
該產品可以提高塑料制品的抗氧化性能，延長使用壽命。
Anti-aging masterbatch: This product can improve the oxidation resistance of plasticproducts and prolong the service life.
消光霧化母粒:
該產品能夠使PET薄膜產生特別的霧化啞光效果，但薄膜產品仍然保留一定的透明度。
Extinction atomization masterbatch: This product can make PET film produce speciaatomization matte effect, but the film product still retains certain transparency.
紅外線母粒:
本該具有隔熱率高，800~2500nm紅外線阻隔率可達99%以上;耐候性強，采用純無機金屬氧化物，不褪色，性能無衰減;分散性好，相容性佳，性能穩定，無析出。
Infrared masterbatch: lt should have high heat insulation rate, and the infrared barrierrate of 800 ~ 2500nm can reach more than 99%; Strong weather resistance, pureinorganic metal oxide, no fading, no attenuation of performance; Good dispersion, goodcompatibility,stable performance and no precipitation.
紫外線母粒:
本產品是將紫外線吸收劑通過納米分散填充的方法制得，紫外吸收劑采用有機、無機納米材料與高分子材料復合而成，有效保護產品受到紫外線長期照射產生褪色、老化等現象，延長產品使用期限
Ultraviolet Masterbatch: This product is made by the way of nano-dispersion filling otultraviolet absorbent. The ultraviolet absorbent is made of organic and inorganicnano-materials and polymer materials, which can effectively protect the product fromfading and aging caused by long-term ultraviolet irradiation and prolong the service lifeofthe product
開口爽滑母粒:
該產品分為純開口母粒、純爽滑母粒及開口爽滑功能兼有的母粒。該產品能提高塑料制品表面的光滑度，使重疊的薄膜表面容易打開。
Open smooth masterbatch: This product is divided into pure open masterbatch, puresmooth masterbatch and masterbatch with open smooth function. This product canimprove the smoothness of the surface of plastic products and make the overlapping filmsurface easy to open.
NO:16
其他母粒
抗老化母粒:
該產品可以提高塑料制品的抗氧化性能，延長使用壽命。
Anti-aging masterbatch: This product can improve the oxidation resistance of plasticproducts and prolong the service life.
消光霧化母粒:
該產品能夠使PET薄膜產生特別的霧化啞光效果，但薄膜產品仍然保留一定的透明度。
Extinction atomization masterbatch: This product can make PET film produce speciaatomization matte effect, but the film product still retains certain transparency.
紅外線母粒:
本該具有隔熱率高，800~2500nm紅外線阻隔率可達99%以上;耐候性強，采用純無機金屬氧化物，不褪色，性能無衰減;分散性好，相容性佳，性能穩定，無析出。
Infrared masterbatch: lt should have high heat insulation rate, and the infrared barrierrate of 800 ~ 2500nm can reach more than 99%; Strong weather resistance, pureinorganic metal oxide, no fading, no attenuation of performance; Good dispersion, goodcompatibility,stable performance and no precipitation.
紫外線母粒:
本產品是將紫外線吸收劑通過納米分散填充的方法制得，紫外吸收劑采用有機、無機納米材料與高分子材料復合而成，有效保護產品受到紫外線長期照射產生褪色、老化等現象，延長產品使用期限
Ultraviolet Masterbatch: This product is made by the way of nano-dispersion filling otultraviolet absorbent. The ultraviolet absorbent is made of organic and inorganicnano-materials and polymer materials, which can effectively protect the product fromfading and aging caused by long-term ultraviolet irradiation and prolong the service lifeofthe product
開口爽滑母粒:
該產品分為純開口母粒、純爽滑母粒及開口爽滑功能兼有的母粒。該產品能提高塑料制品表面的光滑度，使重疊的薄膜表面容易打開。
Open smooth masterbatch: This product is divided into pure open masterbatch, puresmooth masterbatch and masterbatch with open smooth function. This product canimprove the smoothness of the surface of plastic products and make the overlapping filmsurface easy to open.
鎮江東坤新材料科技有限公司致力于生產高質量塑料著色母粒和高性能功能母粒。是集研發、生產和銷售為一體的企業。
Tel:13814791124
Email:Dongkunsemu@163.com
Address:江蘇鎮江丹陽市標龍·丹陽陵口產業新城
官方微信
微信掃一掃
蘇公網安備32118102000823
